You don't want any caustic chemicals going through your pump, especially bleach or caustic degreasers.Though if your pressure washer is actually producing 3200 psi at the pump outlet, you might be pushing it a bit with that foam gun, which is rated for 3000 psi. The second foam gun you linked on Amazon will work - you need a foam gun with a male quick connect (the same connection as on your spray tips).Your manual should tell you whether you need to add oil, but I would assume you do. The oil is probably just residual oil.It's generally a good habit to add Sta-bil to any gas cans you're filling up. If you are going to go through a full tank of gas the same day you get the gas, you don't really need to add fuel stabilizer, but if your pressure washer is going to sit unused for more than a week or two with gas in the tank, you should add some Sta-bil. Get some Sta-bil at Autozone or Advance Auto (or whatever equivalent auto stores you have nearby).You want straight gasoline if you can get it, no ethanol.EDIT: Is it possible to control the pressure of the water coming out? There's a lever that moves left and right and has a gas station dispenser picture on it, so I'm assuming that it varies the amount of fuel being used and therefore can be considered the "throttle"? I'm asking since there's no way in hell I'm using all 3200 PSI on my car!.It will ALWAYS stay in my insulated garage when in use if any of this info helps. What is this "pump saver", and do I need it? I live in the Portland, OR area and will most likely not be using this from the November-February time frame.Is this true? In response to question #4, would you all recommend I just put my car soap in the detergent bottle and use that feature of the pressure washer rather than a foam gun attachment? I've heard that using the detergent/soap feature on pressure washers is not a good idea for the longevity and reliability of the pressure washer.What do I need to use a foam gun to spray foam onto my car? Do I have to look for a my-pressure-washer-specific foam gun or can I just find any "pressure washer foam gun" (like this) on Amazon and use that on my pressure washer? I currently have a quick-disconnect foam gun system from Chemical Guys that just screws onto your garden hose like a normal head would (I have this). I have a garden hose outside my house and am going to be primarily using this for washing my car.Is this just residual engine assembly oil or testing oil, and is it normal for brand-new pressure washers to require oil to be put in upon the first startup? I couldn't find any visible sign that there's oil in the engine. When I removed it, the dipstick was nearly dry. I then cleaned it with a rag, and then put it back in all the way (yes, I screwed the dipstick in all the way). The oil dipstick when I initially removed it had residual oil on it and was dripping very very slightly of oil.What is this fuel treatment and stabilizer that it speaks of? Can anyone recommend any products?.Does this mean that I have to add this "fuel treatment and stabilizer" to the pressure washer's gas tank every time I add fuel, or do I just add this treatment/stabilizer once and leave it in for a specific amount of time?.The recoil starter handle has a tag over it that says "Add fuel treatment and stabilizer to fresh fuel".At the gas station, what gas should I get for this pressure washer? Any gas storage tips or anything in general about fuel/gas? I had a few questions for you all here, as a first-time pressure washer owner: I just got a Husqvarna PW3200 3200 PSI 2.5 GPM pressure washer from Costco with a Briggs & Stratton 950 Series engine. I'm not new to gas engine maintenance, though-I DIY all my cars :) I've used one before (A Karcher w/ Honda engine my friend lent to me) but never have maintained one or owned one. First post here, as well as a first-time pressure washer owner.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |